Neumann AK 50

by Neumann

Rok isporuke: 20-30 dana

SKU

SEN-069016

Neumann AK 50 - Hypercardioid Miniature Capsule for KM 100 and KM 100F Power Supplies

110.601,00 RSD 92.167,50 RSD

Plaćanje na rate Možete plaćati na rate koristeći Visa, Visa Premium, Maestro, MasterCard, Diners kreditne kartice. Za više detalja, kliknite na link sa informacijama o metodama plaćanja.
Brza dostava Za sve porudžbine u Srbiji primljene do 14:00 časova radnog dana, isporuka će biti izvršena narednog radnog dana.
Međunarodna kupovina

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sardžaj pakovanja

1 x Neumann AK 50

Detalji

The Neumann AK 50 microphone capsule is part of the KM 100 miniature series microphone systems. The AK 50 microphone element features a pressure gradient, single diaphragm transducer with a hyper-cardioid polar pattern.

The hyper-cardioid polar pattern is highly effective in reducing off-axis ambiance and noise. Attenuation of sound from the side or rear is about 10dB with the least sensitivity at an angle of 120 degrees. This allows the element to be used in recording and sound reinforcement applications, in front of stage.

Modular Design: The capsule is developed for use with the KM100 and KM100F modular power supplies.

Hyper-Cardioid Polar Pattern: The AK 50 element features a hyper-cardioid pick up pattern which is effective in minimizing room ambiance, monitor noise and other off-axis signal.

Više informacija

Transducer	Pressure Gradient Condenser
Polar Pattern	Hypercardioid
Frequency Response	20 Hz - 20 kHz
Dynamic Range (Typical)	121 dB
Signal-to-Noise Ratio	68 dB, Related at 1 Pa at 1 kHz (CCIR dB) 77 dB, Related at 1 Pa at 1 kHz (A-Weighted dB)
Maximum Input Sound Level	138 dB Less than 0.5% THD (without Preattenuation) 148 dB Less than 0.5% THD (with Preattenuation)
Power Requirements	Phantom +48v (KSM 100 Power Supply)
Output Impedance	50 Ohms
Output Connectors	XLR-3 Type (KSM 100 Power Supply)
Pad	Yes, -10 dB Preattenuation
Low Frequency Roll-Off	Use KSM 100F Power Supply
Dimensions (LxDiameter)	3.68 x 0.88" (92 x 22mm)
Weight	2.82 oz. (80 g)